Intercom Viewer Table Stand
SKU: UACC-Intercom-Viewer-TS
Metal table stand for Intercom Viewer.
- Dimensions: 123.6 x 78.8 x 72 mm / (4.9 x 3.1 x 2.8")
- Weight: 186 g (6.6 oz)
- Enclosure Material: Aluminum alloy, rubber, polycarbonate
HK$444 each
Door access & intercoms
Access Retrofit Hub
DC-powered hub that supports Wiegand and OSDP readers and provides entry and exit control for up to two doors.
HK$2,080 each
On request
SKU: UA-Retrofit-Hub-2
- Networking Interface: (2) 10/100 MbE RJ45 ports
- Max. Power Consumption: 50W
- Power Method: 12/24V DC
- Power Supply: DC 12/24V
- Indoor and Outdoor Use: Indoor only
- Dry Output Relay: Lock: rated 30V DC, up to 1A / Aux: rated 30V DC, up to 1A
Need installation or managed services? Estimate the monthly fee
Indicative hardware prices only, excluding cabling and configuration. Prices follow the distributor list and the firm quote is issued after the site survey.
Product details
For replacing an old access system in stages while keeping some existing readers.
Full specifications
Reproduced from the official manufacturer specifications; the published figures prevail. Official specifications
Overview
- Dimensions
- 140 x 120 x 45 mm(5.5 x 4.7 x 1.8")
- Supported Doors
- 2
- Maximum User Count
- 10,000
- Input Terminals
- (2) Third-party Wiegand Reader / UniFi Retrofit Reader(2) Door exit request(2) Door position(1) Emergency
- Power Method
- 12/24V DC
- NDAA Compliant
- UL 294 Level
- Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I
Mechanical
- Weight
- 420 g (14.8 oz)
- Enclosure Material
- Polycarbonate
- Mount Material
- SGCC steel
- Mounting
- Din-rail (Included)
Hardware
- Digital Input
- (2) Third-party Wiegand Reader / UniFi Retrofit Reader(2) Door exit request(2) Door position(1) Emergency
- Dry Output Relay
- Lock: rated 30V DC, up to 1AAux: rated 30V DC, up to 1A
- Powered Output Relay
- 12V Lock: 12V DC, up to 1A24V Lock: 24V DC, up to 0.5A
- Indoor and Outdoor Use
- Indoor only
- Ambient Operating Temperature
- -10 to 40° C(14 to 104° F)
- Ambient Operating Humidity
- 5 to 90% noncondensing
- Networking Interface
- (2) 10/100 MbE RJ45 ports
- Power Supply
- DC 12/24V
- Max. Power Consumption
- 50W4W without connected readers or locks
- Reader Power Output
- 12V DC, up to 0.5A
- LEDs
- W/B <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
- Buttons
- (1) Factory reset(2) 12V/Dry/24V switch
- Recommend Max. Cable Length
-
- UA-Retrofit-Reader (250mA)
- 18 UACC-Cable-DoorLockRelay length: 152.4 m (500 ft)
- UA-Lock-Electric (400mA)
- 24 AWG length: 25 m (82 ft)22 AWG length: 42 m (138 ft)20 AWG length: 66 m (217 ft)18 UACC-Cable-DoorLockRelay length: 100 m (328 ft)
- UA-Lock-Magnetic-540kg (500mA)
- 24 AWG length: 20 m (66 ft)22 AWG length: 32 m (105 ft)20 AWG length: 51 m (167 ft)18 UACC-Cable-DoorLockRelay length: 80 m (262 ft)
- UA-Lock-Magnetic-270kg (800mA)
- 24 AWG length: 12 m (39 ft)22 AWG length: 20 m (66 ft)20 AWG length: 30 m (98 ft)18 UACC-Cable-DoorLockRelay length: 46 m (151 ft)
- Other locks (1A)
- 24 AWG length: 9 m (30 ft)22 AWG length: 15 m (49 ft)20 AWG length: 24 m (79 ft)18 UACC-Cable-DoorLockRelay length: 36 m (118 ft)
- PoE Cabling Requirements
- Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
- UL 294 Statement
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- CAN/ULC-60839-11-1 Grade
- Grade assignment: I
- Certifications
- CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision level
- UA-Retrofit-Hub-2, V01
Software
- Management Application
- Access
- Software Information
- The software version can be checked at <a href="https://unifi.ui.com/" target="_blank" rel="noopener noreferrer">https://unifi.ui.com</a>
Related products
Access Reader Pro Angle Mount
SKU: UACC-Reader-Pro-AM-W
Angled mounting accessory for UniFi Professional Access Readers.
- Dimensions: 160 x 40.4 x 31.1 mm / (6.3 x 1.6 x 1.2")
- Weight: 43 g (1.5 oz)
- Enclosure Material: Polycarbonate
HK$240 each
Access Card
SKU: UA-Card-B-10
A pack of highly-secure NFC cards used for access control within UniFi.
- NFC Frequency: 13.56 MHz
- Format: ISO 7810 ID-1
- NFC Technology: MIFARE DESFire EV3 / UniFi Access Proprietary Security Protocol
HK$260 each
Not sure which model fits?
Book a free site survey and we will size the models and quantities to your floor plan, walls and headcount.
Book a free site survey Fulfilment
Enquiry list ·
Your list is stored in this browser only. Send it by WhatsApp or email and we confirm supply and reply with a quote.