- 數碼輸入
- (2) Third-party Wiegand Reader / UniFi Retrofit Reader(2) Door exit request(2) Door position(1) Emergency
- 乾接點輸出繼電器
- Lock: rated 30V DC, up to 1AAux: rated 30V DC, up to 1A
- 帶電輸出繼電器
- 12V Lock: 12V DC, up to 1A24V Lock: 24V DC, up to 0.5A
- 室內外適用
- Indoor only
- 工作環境溫度
- -10 to 40° C(14 to 104° F)
- 工作環境濕度
- 5 to 90% noncondensing
- 網絡介面
- (2) 10/100 MbE RJ45 ports
- 電源供應器
- DC 12/24V
- 最大耗電量
- 50W4W without connected readers or locks
- 讀卡器輸出功率
- 12V DC, up to 0.5A
- 指示燈
- W/B <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
- 按鍵
- (1) Factory reset(2) 12V/Dry/24V switch
- 建議最長線材長度
-
- UA-Retrofit-Reader(250mA)
- 18 UACC-Cable-DoorLockRelay length: 152.4 m (500 ft)
- UA-Lock-Electric(400mA)
- 24 AWG length: 25 m (82 ft)22 AWG length: 42 m (138 ft)20 AWG length: 66 m (217 ft)18 UACC-Cable-DoorLockRelay length: 100 m (328 ft)
- UA-Lock-Magnetic-540kg(500mA)
- 24 AWG length: 20 m (66 ft)22 AWG length: 32 m (105 ft)20 AWG length: 51 m (167 ft)18 UACC-Cable-DoorLockRelay length: 80 m (262 ft)
- UA-Lock-Magnetic-270kg(800mA)
- 24 AWG length: 12 m (39 ft)22 AWG length: 20 m (66 ft)20 AWG length: 30 m (98 ft)18 UACC-Cable-DoorLockRelay length: 46 m (151 ft)
- 其他鎖具(1A)
- 24 AWG length: 9 m (30 ft)22 AWG length: 15 m (49 ft)20 AWG length: 24 m (79 ft)18 UACC-Cable-DoorLockRelay length: 36 m (118 ft)
- PoE 佈線要求
- Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
- UL 294 聲明
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- CAN/ULC-60839-11-1 等級
- Grade assignment: I
- 認證
- CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- 文件編號、發行日期及/或修訂版本
- UA-Retrofit-Hub-2, V01