Intercom Viewer Table Stand
SKU: UACC-Intercom-Viewer-TS
Metal table stand for Intercom Viewer.
- Dimensions: 123.6 x 78.8 x 72 mm / (4.9 x 3.1 x 2.8")
- Weight: 186 g (6.6 oz)
- Enclosure Material: Aluminum alloy, rubber, polycarbonate
HK$444 each
Door access & intercoms
Access Intercom Viewer
Display that works with Intercom and Reader Pro for visitor screening and remote access control.
HK$1,750 each
In stock
SKU: UA-Intercom-Viewer
- Networking Interface: (1) 10/100 Mbps RJ45 port
- Resolution: 1280 x 720 px
- Connectivity: Ethernet
- Max. Power Consumption: 5W
- Power Method: PoE / UL 294 Power-limited Class 2 PSU / UL 60950-1/62368-1 LPS/PS2 PSU
- Indoor and Outdoor Use: Indoor only
Need installation or managed services? Estimate the monthly fee
Indicative hardware prices only, excluding cabling and configuration. Prices follow the distributor list and the firm quote is issued after the site survey.
Product details
At reception, so staff can see who is there before releasing the door.
Full specifications
Reproduced from the official manufacturer specifications; the published figures prevail. Official specifications
Overview
- Dimensions
- 135 x 72 x 31.8 mm(5.3 x 2.8 x 1.3")
- Mobile Unlock
- NDAA Compliant
- UL 294 Level
- Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I
Mechanical
- Weight
- 168 g (5.9 oz)
- Enclosure Material
- Glass, polycarbonate
- Mount Material
- Aluminum alloy
- Mounting
- Wall (Included)Gang box mount (Optional)
Hardware
- Indoor and Outdoor Use
- Indoor only
- Networking Interface
- (1) 10/100 Mbps RJ45 port
- Connectivity
- Ethernet
- Power Method
- PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU
- Max. Power Consumption
- 5W
- Supported Voltage Range
- 44–57V DC
- Display
-
- Size
- 127 mm (5") diagonal
- Luminance
- 300 nits (Typical)
- Screen Orientation
- Portrait
- Resolution
- 1280 x 720 px
- Microphone
- Speaker
- Buttons
- (1) Factory reset
- PoE Cabling Requirements
- Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
- UL 294 Statement
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- CAN/ULC-60839-11-1 Grade
- Grade assignment: I
- Certifications
- CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision level
- UA-Intercom-Viewer, V01
- Ambient Operating Temperature
- 0 to 40° C(32 to 104° F)
- Ambient Operating Humidity
- 5 to 95% noncondensing
Software
- Management Application
- Access
- Software Information
- The software version can be checked at <a href="https://unifi.ui.com/" target="_blank" rel="noopener noreferrer">https://unifi.ui.com</a>
Related products
Access Reader Pro Angle Mount
SKU: UACC-Reader-Pro-AM-W
Angled mounting accessory for UniFi Professional Access Readers.
- Dimensions: 160 x 40.4 x 31.1 mm / (6.3 x 1.6 x 1.2")
- Weight: 43 g (1.5 oz)
- Enclosure Material: Polycarbonate
HK$240 each
Access Card
SKU: UA-Card-B-10
A pack of highly-secure NFC cards used for access control within UniFi.
- NFC Frequency: 13.56 MHz
- Format: ISO 7810 ID-1
- NFC Technology: MIFARE DESFire EV3 / UniFi Access Proprietary Security Protocol
HK$260 each
Not sure which model fits?
Book a free site survey and we will size the models and quantities to your floor plan, walls and headcount.
Book a free site survey Fulfilment
Enquiry list ·
Your list is stored in this browser only. Send it by WhatsApp or email and we confirm supply and reply with a quote.