Intercom Viewer Table Stand
SKU: UACC-Intercom-Viewer-TS
Metal table stand for Intercom Viewer.
- Dimensions: 123.6 x 78.8 x 72 mm / (4.9 x 3.1 x 2.8")
- Weight: 186 g (6.6 oz)
- Enclosure Material: Aluminum alloy, rubber, polycarbonate
HK$444 each
Door access & intercoms
G3 Starter Kit Pro
Starter kit that provides complete entry and exit control for a single door with two readers and Touch Pass support.
HK$5,942 each
On request
SKU: UA-G3-SK-Pro
- Networking Interface: (5) 10/100/1000 Base-T
- Resolution: 2MP 1200 x 1600 (3:4)
- Max. Frame Rate: 30 FPS
- Field of View: H: 98.6°, V: 125.7°, D: 157.8°
- NFC Frequency: 13.56 MHz
- Connectivity: BLE 4.2 / NFC
Need installation or managed services? Estimate the monthly fee
Indicative hardware prices only, excluding cabling and configuration. Prices follow the distributor list and the firm quote is issued after the site survey.
Product details
One kit with everything needed to enter and exit a door - for a first access control install.
Full specifications
Reproduced from the official manufacturer specifications; the published figures prevail. Official specifications
Overview
- In the Box
- (1) Door Hub(1) G3 Reader Pro(1) G3 Reader(2) Pocket KeyfobsG3 Reader for door exit, or entry for an additional door (second Hub required)
- Touch Pass
- 10 free 1-year Touch Passes included<a href="https://help.ui.com/hc/en-us/articles/27130425853079-UniFi-Access-Touch-Pass-Configuration" target="_blank" rel="noopener noreferrer">Learn More</a>
Door Hub
- Dimensions
- 174.9 x 126 x 32.9 mm(6.9 x 5 x 1.3")
- Supported Doors
- 1
- Maximum User Count
- 6,000
- Input Terminals
- (2) Door exit request(1) Door position(1) Emergency
- Power Method
- PoE++UL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU
- Weight
- 363 g (12.8 oz)
- Enclosure Material
- Polycarbonate
- Mount Material
- Polycarbonate
- Mounting
- DIN-rail (Included)
- Networking Interface
- (5) 10/100/1000 Base-T
- PoE Interface
- (1) PoE++ input, 50V DC, 1A(4) PoE outputs, 50V DC, 30W per port(Max 45W aggregated)
- Max. Power Consumption
- 30W (Without PoE output)50W (With PoE output)
- Digital Input
- Request to exit, request to enter, remote release, door position sensor
- Dry Output Relay
- Lock: 30V DC, 1AAux: 30V DC, 1A
- Powered Output Relay
- Lock: 12V DC, 1AAux: 12V DC, 0.33A12V DC, 0.33A
- LEDs
- B/W <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
- Button
- (1) Factory reset
- Recommend Max. Cable Length
-
- UA-Lock-Electric (400mA)
- 24 AWG length: 25 m (82 ft)22 AWG length: 42 m (138 ft)20 AWG length: 66 m (217 ft)18 UACC-Cable-DoorLockRelay length: 100 m (328 ft)
- UA-Lock-Magnetic-540kg (500mA)
- 24 AWG length: 20 m (66 ft)22 AWG length: 32 m (105 ft)20 AWG length: 51 m (167 ft)18 UACC-Cable-DoorLockRelay length: 80 m (262 ft)
- UA-Lock-Magnetic-270kg (800mA)
- 24 AWG length: 12 m (39 ft)22 AWG length: 20 m (66 ft)20 AWG length: 30 m (98 ft)18 UACC-Cable-DoorLockRelay length: 46 m (151 ft)
- Other locks (1A)
- 24 AWG length: 9 m (30 ft)22 AWG length: 15 m (49 ft)20 AWG length: 24 m (79 ft)18 UACC-Cable-DoorLockRelay length: 36 m (118 ft)
- PoE Cabling Requirements
- Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
- UL 294 Level
- Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I
- UL 294 Statement
- Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- CAN/ULC-60839-11-1 Grade
- Grade assignment: 1
- Ambient Operating Temperature
- 0 to 40° C (32 to 104° F)
- Ambient Operating Humidity
- 5 to 95% noncondensing
- Certifications
- CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Management Application
- UniFi Access
- Software Information
- The software version can be checked at <a href="https://unifi.ui.com/" target="_blank" rel="noopener noreferrer">https://unifi.ui.com</a>
- Document number, and issue date and/or revision level
- UA-Hub-Door002, V01
G3 Reader Pro
- Dimensions
- 160 x 40.4 x 40.55 mm(6.3 x 1.59 x 1.6")
- Integrated Camera
- View angle: H: 96.67°, V: 123.15°, D: 153.11°
- NFC Card & Keyfob Access
- PIN Access
- Apple/Google Wallet
- Mobile Unlock
- Face Unlock
- Two-Way Intercom & Doorbell Access
- Weatherproofing
- IP55
- Weight
- 136 g (4.8 oz)
- Enclosure Material
- Polycarbonate, glass
- Mount Material
- Aluminum alloy
- Mounting
- Wall, gang-box mount (Included)Angle mount, junction box (Optional)
- Indoor and Outdoor Use
- Networking Interface
- (1) GbE RJ45 port
- Connectivity
- BLE 4.2NFC
- Power Method
- PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU
- Max. Power Consumption
- 6W
- Supported Voltage Range
- 48V DC
- ESD/EMP Protection
- Air: ±15kV, contact: ±8kV
- Video
-
- Max. Frame Rate
- 30 FPS
- Resolution
- 2MP 1200 x 1600 (3:4)
- Optics
-
- Resolution
- 12 MP (3072 × 4096)
- Field of View
- H: 98.6°, V: 125.7°, D: 157.8°
- Sensors
- Proximity sensor
- Display
-
- Size
- 120 mm (4.7") diagonal
- Screen Technology
- Capacitive touch
- Luminance
- 480 nits (Typical)
- Screen Orientation
- Portrait
- Resolution
- 1280 x 286 px
- Microphone
- Speaker
- (1) Yes, 1.5W
- LEDs
- R/G/B/W/Amber <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
- Button
- (1) Factory reset
- NFC Frequency
- 13.56 MHz
- NFC Read Range
- < 30 mm (1.18'')
- NFC Technology
- ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)MIFARE Classic / MIFARE DESFIRESony FeliCa™ (ID only)NFC Forum tags T1T, T2T, T3T, T4T and T5TECP 2.0
- PoE Cabling Requirements
- Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
- Ambient Operating Humidity
- 5 to 90% noncondensing
- UL 294 Level
- Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I
- UL 294 Statement
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- CAN/ULC-60839-11-1 Grade
- Grade assignment: I
- Ambient Operating Temperature
- Device: -30 to 45° C (-22 to 113° F)Display: -10 to 45° C (14 to 113° F)The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional.
- NDAA Compliant
- Certifications
- CE, FCC, IC,UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision level
- UA-G3-Pro-W/UA-G3-Pro-B, V01
- Management Application
- UniFi Access
- Software Information
- The software version can be checked at <a href="https://unifi.ui.com/" target="_blank" rel="noopener noreferrer">https://unifi.ui.com</a>
G3 Reader
- Dimensions
- 93 x 40 x 36.5 mm(3.7 x 1.6 x 1.4")
- NFC Card & Keyfob Access
- Apple/Google Wallet
- Mobile Unlock
- Handwave Request to Exit
- Weatherproofing
- IP55
- Weight
- 82 g (2.9 oz)
- Enclosure Material
- Polycarbonate, glass
- Mount Material
- Aluminum alloy
- Mounting
- In-wall, gang box (Included)Junction box (Optional)
- Indoor and Outdoor Use
- Networking Interface
- (1) 10/100 MbE RJ45 port
- Connectivity
- BLE 4.1NFC
- Power Method
- PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU
- Max. Power Consumption
- 5W
- Supported Voltage Range
- 48V DC
- ESD/EMP Protection
- Air: ± 15kV, contact: ± 8kV
- Sensors
- Proximity sensor
- Speaker
- (1) Yes, 0.7W
- LEDs
- R/G/B/W <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
- Button
- (1) Factory reset
- NFC Frequency
- 13.56 MHz
- NFC Read Range
- < 30 mm (1.18'')
- NFC Technology
- ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)MIFARE Classic / MIFARE DESFIRESony FeliCa™ (ID only)NFC Forum tags T1T, T2T, T3T, T4T and T5TECP 2.0
- PoE Cabling Requirements
- Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
- UL 294 Level
- Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I
- UL 294 Statement
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- CAN/ULC-60839-11-1 Grade
- Grade assignment: I
- Ambient Operating Temperature
- -30 to 45° C (-22 to 113° F)
- Ambient Operating Humidity
- 5 to 90% noncondensing
- NDAA Compliant
- Certifications
- CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision level
- UA-G3, V01
- Management Application
- UniFi Access
- Software Information
- The software version can be checked at <a href="https://unifi.ui.com/" target="_blank" rel="noopener noreferrer">https://unifi.ui.com</a>
Pocket Keyfob
- Dimensions
- 84 x 39 x 7.4 mm(3.3 x 1.5 x 0.29")
- Weight
- 16 g (0.56 oz)
- Enclosure Material
- Polycarbonate, stainless steel, silicone rubber
- Weatherproofing
- IP54
- Ambient Operating Humidity
- 10 to 90% noncondensing
- Ambient Operating Temperature
- -10 to 45° C (14 to 113° F)
- NFC Frequency
- 13.56 MHz
- NFC Technology
- ISO/IEC 14443 Type AMIFARE DESFire EV3 4KUniFi Access Proprietary Security Protocol
- NDAA Compliant
- Certification
- CE
Related products
Access Reader Pro Angle Mount
SKU: UACC-Reader-Pro-AM-W
Angled mounting accessory for UniFi Professional Access Readers.
- Dimensions: 160 x 40.4 x 31.1 mm / (6.3 x 1.6 x 1.2")
- Weight: 43 g (1.5 oz)
- Enclosure Material: Polycarbonate
HK$240 each
Access Card
SKU: UA-Card-B-10
A pack of highly-secure NFC cards used for access control within UniFi.
- NFC Frequency: 13.56 MHz
- Format: ISO 7810 ID-1
- NFC Technology: MIFARE DESFire EV3 / UniFi Access Proprietary Security Protocol
HK$260 each
Not sure which model fits?
Book a free site survey and we will size the models and quantities to your floor plan, walls and headcount.
Book a free site survey Fulfilment
Enquiry list ·
Your list is stored in this browser only. Send it by WhatsApp or email and we confirm supply and reply with a quote.