Our engineers passed UFSP: what UniFi Full Stack Professional covers
GNS Engineering Team 3 min read
Our engineers at GNS Technology hold the UFSP (UniFi Full Stack Professional) certification. The certificate is issued by Ubiquiti Academy and covers the whole UniFi line — switching, Wi-Fi, gateways and network security, Protect recording, and Access door control.
For you it comes down to one thing: the person designing your network has been assessed on the same ground, from solution design and device configuration through to fault-finding.
Here is what UFSP tests, how to verify it, and what the certificate means.
What UFSP is
UFSP stands for UniFi Full Stack Professional and is issued by Ubiquiti Academy, Ubiquiti Inc.'s official training and assessment platform. Courses are split by product line, and UFSP is the professional-level credential among them.
Unlike courses that hand out a certificate for attendance, UFSP requires the full course to be completed and examined. The scope runs from the endpoint all the way up to the gateway — it tests an entire network, not a single product.
What it covers
| Area | The problem it maps to on site |
|---|---|
| Switching | VLAN separation, PoE power budget, backbone bandwidth |
| Wi-Fi | Coverage design, channel interference, roaming |
| Gateways and security | Routing, firewall rules, VPN and outbound links |
| Protect recording | Camera placement, storage capacity and retention |
| Access door control | Reader and lock wiring, entry records |
In Hong Kong offices these five rarely turn up on their own. The usual pattern: the Wi-Fi is fine but the VLANs were never separated, or the cameras are up and only then does someone notice the storage covers three days. The point of the credential is that whoever designs the network accounts for all of it from the start.
How to verify it
The UFSP certificate is an official document issued individually by Ubiquiti, carrying its own certificate number and signed by Ubiquiti's CEO. You can download the official PDF:
View the official UFSP certificate (PDF)
We publish one of them; the others are available on request.
What it changes when you choose a system
Not enough coverage cannot be fixed by adding hardware. A weak signal has two causes — the coverage area is too small, or the channels are interfering with each other — and they call for opposite fixes. Adding hardware before anyone has scanned the site usually just amplifies the interference.
VLAN mistakes get expensive later. Staff, guests, cameras and door control should each be separate. Splitting them at the start is far cheaper than retrofitting: the first is configuration, the second is downtime.
A PoE budget nobody added up. A UniFi switch has to power access points, cameras and door control at the same time. Pick the wrong model and the whole unit gets replaced.
What the certificate means
UFSP is an individual professional credential. It shows that the holder passed Ubiquiti Academy's assessment.
On hardware: our UniFi products are supplied through Ubiquiti and installed by us. That is a separate matter from the certification, and we do not blur the two.
Next step
If you are planning UniFi for an office, shop or school, start with the recommended bundles, or book a free site survey: we measure coverage, inspect the existing cabling, then quote a fixed price.
Frequently asked questions
How is UFSP different from other UniFi certifications?
UFSP is the professional-level credential: it requires the whole Ubiquiti Academy course to be completed and examined, covering switching, Wi-Fi, gateways and network security, Protect recording and Access door control. Other courses focus on a single product line, so they certify that area rather than the full stack.
How can I check that the person designing my network really holds it?
Ask us for the official PDF. Every UFSP certificate carries its own number and is issued by Ubiquiti. We publish one of ours on the site, and you can download it from the About page or the certificate link.
Does certification mean the network will have no problems?
No. It shows the designer has been assessed, but performance still depends on the site, the quality of the cabling and how you actually use the network. We survey before quoting, and hand over the rack layout, port map and VLAN records so there is something to check against later.
Do your engineers hold UFSP?
Yes — they are in the GNS engineering team, covering everything from solution design and configuration through to long-term managed support.
